中文版 ∷ 英文版

5-port Gigabit Poe switch

Diwo
DV541G-PF/PT-PoE
interview
  
  • Detailed introduction
Dv541g-pt-poe switch provides simultaneous transmission of data and power from a network node using class 5 network cables. Its port is used for 10/100/1000mbps connection, in which Poe port can also provide ieee802.3af/at standard power supply. Through detection, only 802.3af/at terminal devices are powered after classification, and there is no need to worry about damaging Poe or non Poe devices of private standards. When the AC power supply fails to supply power or it is inconvenient to obtain power (such as high-end PTZ cameras and WiMAX devices) Dv541g series is designed for wireless network and security automation applications. It is compact and flexible. Dv541g series is an ideal choice for small commercial networks that want to deploy wireless access points (APS) and IP based network surveillance cameras economically using Poe Dv541g series switches greatly reduce the power wiring costs that users, wireless LAN access points, video surveillance cameras and other equipment must spend, and better support new services and applications, thus providing users with higher flexibility and mobility.
Advanced self sensing algorithms only supply power to standard PD terminal devices, so there is no need to worry about damaging private standard Poe or non Poe devices. In addition, when the POE device is not connected, it will stop power supply. Simple and reliable design, dv541g series automatically identifies Poe requirements, speed, duplex and network cable types using auto uplinktm.
 
Product features:
◆ support the power supply of wireless access points (APS) and network surveillance cameras through Ethernet cables of category 5 and above
◆ when using category 5 and above unshielded twisted pair, it can supply power to up to 4 terminal devices at the same time
◆ four standard Poe ports support IEEE802.3af (15.4W) standard and are compatible with ieee802.3at (30W)
◆ five 10/100/1000mbps adaptive RJ45 ports, and the power supply distance of Poe port is up to 100 meters
◆ comply with ieee802.310base-t and ieee802.3u100base-tx standards
◆ flow control mode: IEEE 802.3x standard is adopted for full duplex and back pressure standard is adopted for half duplex
◆ support automatic port turnover (auto mdi/mdix), and adopt the exchange mechanism of store and forward
◆ maximum Poe power: 65W (POE port 1 ~ 4 ports), single port maximum output 30W
◆ no fan, natural heat dissipation, small, compact, quiet design, suitable for placing on the desktop or wall
◆ plug and play, without configuration, the power supply is automatically supplied to the adaptive equipment
◆ dynamic LED display makes it easy to know the working status and power supply of the port at any time
◆ through the secondary lightning protection chip design, at the same time, avoid electrostatic induction and circuit isolation protection

 

Specification parameters:

 

Power over Ethernet (POE)

Poe features

It also supports IEEE802 3af,IEEE802 . International standard for 3At power supply

Poe power supply parameters
Single port: IEEE802.3af 15.4W
IEEE802.3at 30W

Maximum power of the whole machine

Conventional 65W, power supply can be matched

Power line pair
Data pair 1236 spare pair 4578 (optional)
 

Chip scheme

PD69104

Port and performance

Chip scheme

RTL8367

Electrical interface parameters

Electrical interface: RJ45

Cable type: unshielded twisted pair (UTP) of category 5 and above

Transmission distance: 100 meters

Protocol standard

IEEE802.3i  10BASE-T

IEEE802.3u  100BASE-TX

IEEE802.3x   Flow Control

IEEE802.3af Power over Ethernet

IEEE802.3at Power over Ethernet

Performance specifications
Store and forward
Backplane bandwidth: 10Gbps (non blocking)
Packet forwarding rate: 1.19gpps
Transmission mode: full duplex / half duplex adaptive
Addressing: 48 bit MAC address
Address database size: 1000 MAC addresses per system
Buffer memory: 96kb per system
Network delay: for 100Mbps data transmission, the delay of 64 data frames shall not exceed 20 microseconds

LED indicator

Per port: rate, link indicator

Each device: power light, Poe work indicator light

safety protection

Meet the requirements of IEC61000-4-2 (ESD) ± 15kV (air), ± 8Kv (continc) and can withstand 8/20us 24a (12a) energy

Environment and specifications

authentication

 CE,ROHS

size

 Product size: 117x85x28mm (length x width x height)

 Package size: 227x185x55mm (length x width x height)

Weight (kg)

 Net weight of product: 0.25kg

 Gross weight of package: 0.8kg

Ambient temperature 

 Working temperature: 0-55 ℃.; Storage temperature: -20-70 ℃

 Working humidity: 90%, no condensation; Storage humidity: 95%, no condensation

guarantee

 1 year

 

 

<